products

Professional Universal Meat Grinder Machine Heavy Duty With #12 Neck Size

Basic Information
Place of Origin: China
Brand Name: Kitchener
Certification: ETL US;FDA
Model Number: MG-204185
Minimum Order Quantity: 50
Price: Negotiation
Packaging Details: 1 piece in carton
Delivery Time: 45 days
Payment Terms: L/C,T/T
Supply Ability: 9000pcs per month
Detail Information
Product Name: Electric Meat Grinder Cutting Plate: 3 Stainless Steel Plates
Feature: Stuffing Tubes Function: Reverse Gearing
Material: Plastic Grindes: Up To 3.3lbs
High Light:

metal meat grinder

,

electric meat mincer grinder


Product Description

Commercial Grade Meat Grinder Variety of Sausage Funnels Meat Grinding Plate

 

Before Use:

 

1 Disassemble the grinder head and wash each part thoroughly in warm soapy water
2 Removing all packing grease and oil from the surfaces
3 Dry all parts before re-assembly
4 Keep packing material for future storage of grinder and grinder parts

 

After Use:

  1. Disassemble all parts and wash thoroughly in soapy water
  2. Hand wash parts-Do not put parts in dishwasher
  3. You must remove all foreigh material from all appliance parts
  4. Dry all surfaces
  5. Do not use bleach or chlorine based chemicals to clean
  6. Discoloration of plastic parts can occur
  7. Wipe down all non stainless steel parts with a food grade spray
  8. Alternatively, wipe down with a salad oil to keep from rusting
  9. Do not immerse motor housing in water. Damage to motor can occur

Description:

  • Heavy-duty construction with #12 neck size
  • Powerful 2/3 HP(500W) motor
  • Grinds up to 5.5lb. of meat per minute
  • Reverse function for easily un-jamming your grinder to maximize output
  • Includes 2 stainless steel cutting plates 3/16'' & 3/8'', a stainless steel stuffing plate and a stainless steel cutting knife
  • Comes with a set of 3/8'', 3/4'' and 1-1/8'' stuffing tubes
  • Meat stomper included for accessories storage
  • Item# 52021250

Specifications:

 

Item number MG-204191 MG-204185 52021250
Rate Power 400W 500W 500W
Master Pack 4pcs/ctn 4pcs/ctn 1pc/ctn
Measure

19''x17''x17''

485x435x435mm

20''x18''x16''

500x445x410mm

16''x13''x14''

410x335x345mm

 

 

 

Assembly Instructions:

  • Insert grinder head into gear housing; be sure that the hopper tray throat is facing upward. Hold grinder head with one hand, place locking knob into the hole on the side of Motor Housing and tighten it clockwise (See Fig 1).
  • Insert auger into the grinder head. You may need to turn the auger to align it with the drive shaft of the motor (See Fig 2).
  • Place cutting knife blade onto Feed Screw shaft of the auger with the Flat edge of blade facing the front (See Fig 3).
  • If blade is not seated properly, meat will not be ground.
  • Place desired grinding plate next to Cutting Blade. The notch in the plate should align with the protrusion on the grinder head (See Fig 4).
  • Firmly screw ring cap onto grinder head. Do not over tighten (See Fig 5).
  • Insert the Hopper meat tray onto the throat of the head (See Fig 6)

Professional Universal Meat Grinder Machine Heavy Duty With #12 Neck Size 0

 

Sausage Stuffing Directions

 

1 Properly prepare casings as directed on casing packaging
2 Place artificial or natural intestines onto sausage funnel
3 Load hopper with prepared meat and feed meat into grinder head opening before operating unit
4 Do not operate grinder without meat in grinder head
5 Damage to auger and/or motor can occur
6 Plug in and turn switch to on position when ready to start
7 Begin to feed sausage mixture into the hooper opening
8 Hold the casing on the sausage tube in one hand and slowly let the meat output pull the casing from the tube
9 Fill casing as desired by holding casing back on tube
10 Twist or tie the sausage into links as desired
11 Tie end of casing into a knot
12 It is recommended that 2 people perform sausage stuffing
13 Add small amounts of water to your ground meat when stuffing sausage to improve output of meat through sausage stuffing tube

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Contact Details

Phone Number : +8615721517916